Remove the peanuts from the "U" bolts on six of the pipe download web 2.0 software track brackets.
Remove the "U" bolt or loosen the clamp bolt on the wheel for the bottom of the gate. Place the "U" bolt beyond, or set the clamp on the wheel, onto the bottom pipe at one finale of the gate. Substitute and constrict the peanuts on the "U" bolt or constrict the clamp bolt on the wheel.Loosen the clamp bolt and nut on the gate facet of the gate latch. Position this part of the gate latch to the facet pipe on the gate at the finale where the bottom wheel is mounted. Set the latch section at a comfy height and constrict the clamp bolt.
Loosen the clamp bolts and peanuts on the two rear manual wheels. On the contradictory finale from where the latched is attached with the gate, affix the rear wheels at the top and bottom of the facet pipe of the gate. Get in line the wheels so that they are parallel to the gate itself. Measure the distance from the axle of the bottom manual wheel to the axle of the top manual wheel.
Position a pipe track bracket on a gate post about 6 inch beyond the ground row. Place the "U" bolt around the gate post and fasten and constrict the peanuts on the "U" bolt to lock up the pipe track bracket to the post. Position an additional track bracket on the gate post beyond the first bracket and the equivalent distance as the measurement from one manual wheel to the other. Affix which bracket with the "U" bolt.
Embed a pipe part into the bottom track bracket. Place an additional track bracket on the other finale of the pipe. Position which track bracket on the row post next to the gate post along the wall. Affix the bracket new web 2.0 tools to the post about 6 inch from the ground with the "U" bolt and peanuts. Repeat this step with an additional section of pipe and a 3rd track bracket.
Embed a pipe part into the first top track bracket. Place an additional track bracket on the other finale of the pipe. Position this bracket on the first row post beyond the bottom bracket and at the equivalent distance as the measurement from one manual wheel to the other. seo link wheel Affix the bracket to the post with the "U" bolt and peanuts. Repeat this step with the last section of pipe and the last track bracket.
Set the gate on edge with the bottom wheels web 2.0 design tools at one finale of the gate resting on the ground. Position the facet of the gate with the manual wheels against the facet of the wall with the tracks. Lift the wall up and set the manual wheels onto the pipe tracks. Swivel the gate back, aligning the gate to the facet of the wall. Swivel the gate closed.
Affix the wall facet of the gate latch to the gate post to get in line with the gate facet of the latch exploiting two stress bands around the gate post and two peanuts and bolts.
